Directv HR10-250 Manuel d'utilisateur télécharger pdf (Page 173)

163

Back Panel Reference

functionality. The HD DVR periodically makes a brief phone call to update your

service information. Do not connect the HD DVR to digital PBX systems. Doing so

may permanently damage your HD DVR’s modem and will void your warranty.

3. Serial. For future use.

4. IR. For future use.

5. HDMI Output. If your TV has an HDMI input jack, you can connect your HD DVR to

your TV using the HDMI cable (supplied). If your TV has a DVI input jack, you can

connect the HD DVR to your TV using the HDMI-to-DVI cable (supplied). Keep in

mind that the HDMI Output jack can send audio and video, but a DVI Input jack

accepts video only. So if you use the HDMI-to-DVI cable, you will need to make a

separate audio connection.

While a cable is connected to the HDMI Output jack, the Component Video Output is

disabled. You can’t view video from both the HDMI Output and the Component Video

Output at the same time.

6. USB (Universal Serial Bus). (2 each) For future use.

7. Component Video Output. If your TV has Component Video Input jacks, you can

connect the HD DVR to your TV using the Component Video cable (supplied). The

Component Video Output is disabled if you connect a cable to the HD DVR’s HDMI

Output jack. You can’t view video from both the HDMI Output and the Component

Video Output at the same time.

8. Composite A/V Output. The red and white jacks (L and R) send a stereo audio signal,

while the yellow (video) jack sends a standard-definition analog picture. Use the

Composite A/V cable (supplied) to connect your HD DVR to your TV, A/V receiver,

VCR, or DVD recorder with these jacks. The yellow video jack sends a picture only if

the HD DVR’s video output format is set to “480i.” See page 29 for more about video

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 187 188

Pas de commentaire

Directv HR10-250 Manuel d'utilisateur Page 173