Directv HR10-250 Manuel d'utilisateur télécharger pdf (Page 38)

Chapter 2

Guided Setup

Off-Air Channels and Video Setup

To begin Off-Air Channels and Video Setup, press the DIRECTV button on your remote

control to go to DIRECTV Central. Select Messages & Setup, then Settings.

Off-Air Channels Settings

If you connected an off-air antenna to your HD DVR, select Channels from the Settings

screen, then select Off-Air Channels to confirm or modify these settings.

• If you selected “Satellite and off-air antenna” as your program source during Guided

Setup, your HD DVR is already set up to receive digital broadcasts from an off-air

antenna. You can use these settings to scan for additional digital off-air channels your

antenna may receive, and specify a secondary network area to gather program

information for digital off-air channels from a nearby city. You can complete these

steps at any time.

• If you selected “Off-Air antenna only” as your program source during Guided Setup,

you must complete these settings to see digital off-air antenna channels in your

channel lists. Keep in mind that if you do not have a satellite dish antenna connected as

well, your HD DVR will not receive any program guide information.

Scan For Off-Air Channels. On the Off-Air Channel Settings screen, highlight Scan For

Off-Air Channels and press SELECT. To proceed with the off-air channel scan, press

THUMBS DOWN three times, then ENTER. The HD DVR begins its scan for digital

channels in your area. This can take several minutes. If additional digital channels are

found, a list is displayed and those channels are added to the Channels You Receive list.

Program information for channels found with this scan may not be available. Additionally,

the HD DVR may detect frequencies for which no channel number information is

available. In this case, the channel will appear in the guide with its frequency number, not

its actual channel number.

If you did not connect an off-air

antenna to your HD DVR, you can

skip “Off-Air Channels Setup” and go to

“Video Setup” on page 29.

An off-air channel’s frequency may

not correspond to its channel

number in the guide. For example, a scan

for off-air channels may detect a signal

on frequency 25, but the corresponding

channel may be 9-1.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 187 188

Pas de commentaire

Directv HR10-250 Manuel d'utilisateur Page 38